Page 5 of catalogue Twin trough gutter tile of Dachziegelwerke Nelskamp GmbH

Laying the twin trough gutter tile D 15 Ü.
Type of laying: Simple roof cladding or pattern roof cladding Technical data
Roof tile Manufacturer Overall length Overall width Covering length Mean covering width Requirement per m2 Weight per tile Weight per m2 Regular roof pitch Laths Recommended storm clip Laths Recommended storm clip Twin trough gutter tile D 15 Ü Nelskamp (D) ~ 42.0 cm ~ 25.2 cm ~ 33.5 - 35.2 cm ~ 20.7 cm ~ 14.1 pieces ~ 3.1 kg ~ 43.7 kg 30° 30 x 50 mm 435/001 40 x 60 mm 435/002

Material requirements for coverage
Laths Counter-laths Roof tile Packing unit* Tiles per pallet Tiles per stack Tiles per pack Half tile Verge tile Walking grid tile Safety step tile Ridge or crest tile Copper roll/Alu roll 2000 (5 m per roll) Ridge/crest clip 470/121 Wood Screws Ridge or crest initial tile Ridge end tile Ridge lath holder Crest lath holder Eaves fresh air element
* only applies for deliveries in Germany

~ 3.3 m/m2 (incl. 10% waste) ~ 1.7 m/m2 (incl. 10% waste) ~ 14.1 pieces/m2 320 pieces 32 pieces 8 pieces as required, ~ 3.0 pieces/m ~ 3.0 pieces/m as required as required ~ 2.7 pieces/m as required 1.0 piece per ridge tile 1.0 piece per ridge tile d = 4.5 mm Screw depth: 24 mm 1.0 piece per ridge or crest start 1.0 piece per ridge end 1.0 piece per rafter 1.0 piece/ ~ 70 cm ~ 1.1 piece/m Fresh air ~ 200 cm2/m

Laying!
The following applies when laying our clay Roof tiles: 1. The NELSKAMP manufacturer's instructions take priority (laying instructions) 2. The specialist rules of the roofing trade (rules for coverings with clay roof tiles) 3. The German Construction Contract Procedures (VOB) (clay roof tile cover)

Covering widths
85 165 207 100 207 125 85

45 60

45

45

45

45 60

85

120

207

100 Chalk line marking lining out every 3 - 5 rows

207

170

85

covering width left verge tile = 16.5 cm Covering widths verge with outer web
33 210 207 100

covering width right verge tile = 12.5 cm

207

168

33

45 75

45

45

45

45 75

33

165

207

100 Chalk line marking lining out every 3 - 5 rows

207

213

33

covering width left verge tile = 21.0 cm

covering width right verge tile = 16.8 cm

Regular roof pitch for clay roof tiles

30°

Regular roof pitch twin trough gutter tile D 15 Ü

If the pitch is below the regular roof pitch the additional measures of the roofing trade rules must be carried out (cf. table). With equivalent roof substructure alternatives: pay attention to the manufacturer's and laying instructions. Warranty must be assumed by the relevant manufacturer.

10°

Minimum roof pitch for roofing with clay roof tiles