Page 5 of catalogue Roofing tiles of Dachziegelwerke Nelskamp GmbH

Laying the Finkenberger pantiles.
Technical data
Roofing tile Manufacturer Overall length Overlap Overall width Covering width Covering length Requirement per m2 Weight per tile Weight per m2 Regular roof pitch
340 300

Material requirements for coverage
Finkenberger pantile Nelskamp (D) ~ 42.0 cm ~ 7.5 - 10.6 cm (depending on roof pitch) ~ 34.0 cm ~ 30.0 cm ~ 31.4 - 34.5 cm (depending on roof pitch) ~ 10.0 pieces ~ 4.6 kg ~ 46.0 kg 22° Laths Counter-laths Roofing tiles Packing unit* Pantiles per stack Half tile Double flap Verge tiles and gable tiles for counter-laths Step tile with support clip Step tile with single step Ridge or crest tile Copper roll/Alu roll 2000 (5 m per roll) Ridge or crest clip 470/77 Wood Screws Ridge or crest disc Ridge lath holder Crest lath holder Eaves fresh air element
* only applies for deliveries in Germany

~ 3.3 m/m2 (incl. 10% waste) ~ 1.7 m/m2 (incl. 10% waste) ~ 10.0 pieces/m2 34 pieces (packed on Pallets on request: 204 pieces per Europallet) as required, ~ 3.0 pcs/m ~ 3.0 pieces/m for left side of roof only ~ 3.0 pieces/m as required as required ~ 2.5 pieces/m as required 1.0 piece per ridge tile 1.0 piece per ridge tile d = 4.5 mm Screw depth 24 mm 1.0 piece per ridge or crest end 1.0 piece per rafter 1.0 piece/ ~ 70 cm ~ 1.1 piece/m Fresh air ~ 200 cm2/m

420

398

Laying!
53

Covering widths
Verge tile
30 310 40 300 40 150 40

The following applies for laying our concrete roofing tiles: 1. The NELSKAMP manufacturer's instructions take priority (laying instructions) 2. The specialist rules of the roofing trade (rules for coverings with concrete roofing tiles) 3. The Construction Contract Procedures VOB (concrete roofing tiles)
300 40 40 270 30

69,5

69,5

30

270

300

150 Chalk line marking Lining out every 3 - 5 rows

300

310

30

covering width left verge tile = 31.0 cm Gable tile for counter-laths
30 310 40 300 40 150 40

covering width right verge tile = 27.0 cm

300 40 40

270

30

103,5

103,5

30

270

300

150 Chalk line marking Lining out every 3 - 5 rows

300

310

30

covering width left verge tile = 31.0 cm covering width double flap tile = 34.0 cm

covering width right verge tile = 27.0 cm

Regular roof pitch for concrete roofing tiles/roof pitch limits
22° regular roof pitch Finkenberger pantile 10° Minimum roof pitch for roofing with concrete roofing tiles

over 30° 22 - 30° under 22°

Minimum overlap 7.5 cm

The design of the concrete roofing tiles permits a variable height overlap. The roof pitch is decisive for the overlap. The reference values alongside apply for the minimum height overlap of concrete roofing tiles with elevated longitudinal rabbet. If the pitch is below the regular roof pitch the additional measures of the roofing trade rules must be carried out (cf. table). With equivalent roof substructure alternatives: pay attention to the manufacturer's and laying instructions. Warranty must be assumed by the relevant manufacturer.

Minimum overlap 8.5 cm

Minimum overlap 10.0 cm