Page 2 of catalogue Notching saws of Elumatec GmbH

[

Notching saw: Very flexible

Notching saw AKS 134/00 > Variable notching possibilities for mullion and transom combinations for e.g. curtain walls, winter garden, sky lights and special designs > The workpiece remains fixed only the sawing units move. Providing precise and safe notching > Both saw units can be simultaneously adjusted in height by means of a hand wheel (analog display on the hand wheel) > Indication of the cutting depth by means of an analog display > Stop system can be changed over for compound mitreand 90° - cuts > Manual adjustment of the cutting angles with digital display of the tilting angles > Support table with cross slide and pivoting back fence is manually adjustable for optimum use of the cutting range > Indication of the pivoting angle of the back fence by means of digital display > Horizontal and vertical profile material clamping > Automatic working cycle at 90° angle (2 - hand control when cutting special angles) > Hydro - Pneumatic saw feed [ Technical information ] Saw unit lower (vertical): > Saw blade diameter 550 mm > Tilting range 45° from the front up to + 60° to the rear > Cutting depth 210 mm max. > Power supply 230 / 400 V, 3~, 50 Hz > Power output 3 kW with motor brake > Spindle speed 2.800 r.p.m. > Angle adjustment for tilting range manual with digital display (standard) Saw unit upper (horizontal): > Saw blade diameter 500 mm > Tilting range from 55° to the bottom up to 60° to the top > Notching depth 190 mm max. > Power supply 230 / 400 V, 3~, 50 Hz > Power output 3 kW with motor brake > Spindle speed 2.800 r.p.m. > Angle adjustment for tilting range manual with digital display (standard)