Page 9 of catalogue Mitre saws of Elumatec GmbH

Aluminium porfilbearbeitung

like grinding

]
[ M i t r e s a w s ]

Mitre saw MGS 142/11 > The ideal mitre saw for the series production in the industry > Automatically opening of safety hood > Standard equipped with exhaust connector on the counter Plates at bottom and back side > Pulsed coolant system > Profile feed from the left hand and material stop on the right hand side > Standard equipped with saw blade [ Technical information ] > Tilting range Pneumatic from 90° to 45° (optional) > Cutting capacity see cutting diagram > Saw blade diameter 500 mm > Spindle speed 2.800 r.p.m. > Power supply 230 / 400 V, 3~, 50 Hz > Power output 4 kW > Compressed air supply 7 bar > Air consumption per working cycle 20 l without mist spray, 32 l with mist spray > Length 1.100 mm, width 1.300 mm, height 1.700 mm, weight 550 kg [ Optional ] > Hydro - pneumatic saw feed > Adjustment of intermediate tilting angles with digital display E 111 > Horizontal material clamping > Extraction system > Length stop and measuring systems see page 34 > Adjustment of intermediate angles by means of hand wheel and digital display E 111 (not available for MGS 142 / 31) > Roller Conveyors > Saw blades > High performance cutting fluid > Motor power output 5,5 kW Mitre saw MGS 142/21 > See MGS 142 / 11, however: > Profile feed from the right hand side and material stop from the left hand side Mitre saw MGS 142/31 > See MGS 142 / 21, however: > Table separation to obtain best quality of cut. No after cut of saw blade > Tilting range 90° fix > Length 1.100 mm, width 1.300 mm, height 1.700 mm weight 550 kg
tilted

[ 08 | 09 ]

roller conveyor ]