Page 19 of catalogue Linear inductive displacement sensors of Micro-Epsilon Messtechnik GmbH & Co. KG

19

Sensor system with miniature sensor and on-board electronics KRS719(01)

Compact design Calibrated system On-board electronics

Model Article Measuring principle Measuring range Target (included) Linearity Resolution Frequency response Housing Temperature stability Output Power supply Temperature range Adjustment Protection class Electronics FSO = Full Scale Output sensor electronics

KRS719(01) 4350026.01 LVDT (page 12) ± 1 mm plunger 0800080 (ø2 x 62 long) with thread M4x0.5 (15 mm long) ±0.15 % FSO (3 µm) 0.07% FSO (1.4 µm) 100 Hz (-3dB) nickel-plated steel zero ± 50 ppm / °C 4 ... 20 mA options: 2 ... 20 mA / ± 3.9 VDC 22.8 ... 25.2 VDC -20°C ... +80°C 0° C ... +50°C zero, gain IP 67 incl. circuit board BSC719(02)-I, article 2208078.02

The KRS719 sensor system is used for monitoring the yarn thickness in textile Machines. The miniaturized sensor and the board-mounted electronics can be costeffectively integrated into the available installation spaces and machine controllers. The system is characterized by high stability and repeatability.

1.5 4.6 9-pin sub-D

65

34

~800 increasing signal 15 16 ~50
R20

M4x0.5

52

ø3.5 ø10

* plunger in midrange

The plunger can be introduced into the sensor from both ends.

ø2.9

6*