Page 3 of catalogue Lathe of Emco Maier GmbH

The technology. The headstock is made of vibration absorbing, heavily ribbed cast iron. The rigid, large main spindle runs in high-precision adjustable taper Roller bearings with Camlock DIN 55029 S4 short taper connection. Reverse gear unit in a totally closed construction. Scraped cogs and the axial motion when reversing increase operational reliability and reduce vibration. Slides: longitudinal slide with no-play prismatic guide. Optimum guide ratio with the long guide. The cross slide runs in a dove-tail guideway. Adjustment via pressure plate. Feed automatic or with handwheel. Both the longitudinal and cross slides can be clamped. The upper slide with dove-tail guideway can be pivoted 360°. A feed lever
Camlock DIN 55029 S4, 40 mm (1.6“) spindle bore

with safety lock prevents longitudinal and axial feed switch-through. Infinite speed adjustment. The EMCOMAT 14 does not have a gear box. Electronic speed adjustment, constant cutting speed on the 14D and an impressive 7,5 kW (10.1 hp) drive performance ensure the right speed and most suitable torque throughout the entire torque range.

Options The new EMCOMAT 14 comes with the following options: chip protection door, machine case, multifax fast change holder, jaw chuck, live center, high-pressure coolant device.

3

Precise placement using the large handwheel with graduated collar

Safety 3 For the safety of the operator, the chuck protection and wheel caps are monitored by an electric switch.

EMCOMAT 14S

Long parts are processed with tail stock and live center

Long parts are drilled with a steady rest

Inside turning

Machine case for the clean storage of Tools (Option)

23