Page 17 of catalogue Knife gate valves and buttery valves of Fergo Armaturen GmbH

Of course you will get the whole All-in-one-Service! According to your specications we will equip your Valves. Our personnel is high motivated and enjoy their work.That·s why we say at least any challenge is another hurdle for us to master and with which we continue growing! Starting with pure trade, over reconstruction right up to project·s planning - we are your targeted partner. We are ready for your demands!

Case 1: You‘ve changed the supplier. But there‘s one problem to solve: The previous supplier lacquered his valves principally in his own company‘s colour. Now, you don‘t want to build up a multicolored plant or you don‘t want your customer to know that your supplier has changed. Also applies here: Inform us! We will lacquer your valves to your desired colour. You need an other cyanotype, green, beige or rather signalyello? You give us the color code and we will do the rest. (ŒCase 1•)

Fall 2: You need a short dated alternative to an single-acting actuated Knife gate valve. A knife gate valve that shuts o the medium even in case of a power black out or an air pressure failure. What to do? Inform uns! We will re-equip your double-acting actuated knife gate valve so it will close in case of need even if one of the named failures occure. How that works? We add on an air-tank which is able to perform a correspondingly large air pressure to close the knife gate valve fast enough. You install the valve, without connect the air pressure supply to the cylinder, but to the tank. So the tank will be kept full. And because of specic Check valves it can not escape any longer. We take care for the cabling of the Pneumatic Wires and, if applicable, of the installed position sensor. (ŒCase 2•)

Case 2: Case 2:

FERGO® Armaturen GmbH

|17