Page 6 of catalogue Hydraulic extraction pullers of Schaeffler Technologies GmbH & Co. KG

FAG PowerPull TRISECTION PLATE Bearings and machine parts stay in one piece!
For Hydraulic and mechanical pullers: the FAG PowerPull TRISECTION PLATE. This allows the extraction of complete bearings, inner rings with a firm seating or other workpieces. The load capacity and extraction force are precisely matched to each other and the unique design is patented. The SPIDER puller hooks grip directly under the screw studs of the TRISECTION PLATE and give uniform force distribution. Even where parts are firmly seated, there is no tilting or bending. The high extraction forces are concentrated, for example in a bearing, on the inner ring; in general, the bearing and shaft remain intact and can be used again. The optimised application of forces also reduces the work required for extraction. The TRISECTION PLATE can be fitted under the bearing with only a small number of manual operations and is proven in practical use. c FAG Kugelfischer AG Georg-Schäfer-Straße 30 97421 Schweinfurt Germany b (Ø max.) Tel: +49-(0) 2407 - 91 49 99 Fax: +49-(0) 2407 - 91 49 59 a (Ø min.) E-Mail: support@fis-services.de www.fis-services.de

FAG PowerPull TRISECTION PLATE Puller plate Dimensions [mm] abc 12 50 113 Mass [kg] 0,5 2,6 5,8 18,4 50,3 Recommended for hydr. puller SPIDER – 40/60/80/100 80/100/20/175/200 175/200/250/300 250/300/400 mech. puller
Every care has been taken to ensure the

TRISECTION PLATE 50

53.130 53.230 53.295 53.390 53.640

correctness of the information contained in this publication but no liability can be accepted for any errors or omissions. We reserve the right to make changes in the interest of technical progress. © by FAG 2004 This publication or parts thereof may not be reproduced without our permission. WL 80 344 EA

TRISECTION PLATE 100 26 100 218 TRISECTION PLATE 160 50 160 322 TRISECTION PLATE 260 90 260 480 TRISECTION PLATE 380 140 380 656

83/03/04 Printed in Germany