Page 5 of catalogue Hollow interlocking tile of Dachziegelwerke Nelskamp GmbH

Laying the NIBRA® hollow interlocking tile H 10.
Technical data
Roof tile Manufacturer Overall length Overall width Mean covering length Mean covering width Requirement per m2 Weight per tile Weight per m2 Regular roof pitch Laths Recommended storm clip Laths Recommended storm clip NIBRA® H 10 hollow interlocking tile Nelskamp (D) ~ 48.4 cm ~ 29.7 cm ~ 38.3 cm ± 15 mm ~ 24.6 cm ~ 10.3 pieces ~ 4.6 kg ~ 47.3 kg 22° 30 x 50 mm 435/101 40 x 60 mm 435/102

Material requirements for coverage
Laths Counter-laths Roof tile Packing unit* Tiles per pallet Tiles per stack Double flap Verge tile Safety step pantile Ridge or crest tile Copper roll/Alu roll 2000 (5 m per roll) Ridge/crest clip 470/41 Wood Screws Ridge or crest initial tile Ridge end tile Ridge lath holder Crest lath holder Eaves fresh air element
* only applies for deliveries in Germany

~ 2.5 m/m2 (incl. 10% waste) ~ 1.7 m/m2 (incl. 10% waste) ~ 10.3 pieces/m2 240 pieces 30 pieces ~ 2.5 pieces/m for left side of roof only ~ 2.5 pieces/m as required ~ 2.6 pieces/m as required 1.0 piece per ridge tile standard 1.0 piece per ridge tile d = 4.5 mm Screw depth: 24 mm 1.0 piece per ridge or crest start 1.0 piece per ridge end 1.0 piece per rafter 1.0 piece/ ~ 70 cm ~ 1.1 piece/m Fresh air ~ 200 cm2/m

Laying!
The following applies when laying our clay Roof tiles: 1. The NELSKAMP manufacturer's instructions take priority (laying instructions) 2. The specialist rules of the roofing trade (rules for coverings with clay roof tiles) 3. The German Construction Contract Procedures (VOB) (clay roof tile cover)

Covering widths
126 195 246 246 246 120 129

48 75

48

48

48

48 75

126

147

246

246 Chalk line marking Lining out every 3 - 5 rows

246

168

129

covering width left verge tile = 19.5 cm Covering widths verge with outerweb Not available in all colours.
21 278 246 246

covering width right verge tile = 12.0 cm

246

201

21

48 75

48

48

48

48 75

21

230

246

246 Chalk line marking Lining out every 3 - 5 rows

246

249

21

covering width left verge tile = 27.8 cm covering width double flap tile = 32.1 cm

covering width right verge tile = 20.1 cm

Regular roof pitch for clay roof tiles

22°

Regular roof pitch hollow interlocking tile H 10

If the pitch is below the regular roof pitch the additional measures of the roofing trade rules must be carried out (cf. table). With equivalent roof substructure alternatives: pay attention to the manufacturer's and laying instructions. Warranty must be assumed by the relevant manufacturer.

10°

Minimum roof pitch for roofing with clay roof tiles