Page 7 of catalogue HSM Horizontal Baling Presses of HSM GmbH + Co. KG

HSM HL 3521 / HL 3521 S
There are two models of this professional machine available to ensure that you have the right unit for the material you need to press. The basic model, the HL 3521, with its exceptio nal large loading aperture is the perfect machine for compres Stored-program controller PLC High levels of compression are ensured by optimallydimensioned retaining claws nuous polyester tape or wire. The HL 3521 S has been espe cially designed for compressing strongly expanding material Optimum operation ensured by the return stroke of the press ram Hydraulic loading ap for maximum operating comfort and for precompressing Safeguarding of the operating area with infrared Light curtains The unique design and controllable positioning of the press ram allow for easy cleaning and servicing Hydraulic counterplate for bale removal ensures optimum operating convenience and safety The full stroke of the press ram ejects the bale completely

Model Pressing power in kN Motor in kW Voltage / Frequency Loading aperture W x L in mm Loading height in mm Bale weight in kg, depending on material Maximum bale size W x H x L in mm Hourly output in bales Cycle time idle operation (theor.) in sec. Dimensions of machine L x W x H in mm Machine weight in kg

HSM HL 3521 320 9.2 / 15 3 x 400 V / 50 Hz 740 x 2100 1200 up to 600 800 x 1000 x 1200 3-7/4-7 46 / 24 6700 x 1650 x 2485 5500

HSM HL 3521 S 320 22 3 x 400 V / 50 Hz 740 x 2100 1200 up to 500 800 x 1000 x 1200 4-7 21 7900 x 1650 x 2485 5900

All technical data and dimensions are approximate values. Technical and design modifications reserved.

7