Page 15 of catalogue Floor springs of Geze GmbH

Application range For right and left hand single action doors For leaf widths up to 1400 mm For leaf weights up to 250 kg For smoke and fire doors with provision for DIN Floor mounted door closer

The requirement The standards stipulate that the door closer size (closing force of the closer) must be selected appropriate to the door width. The next highest size must be selected if the structural (door height, door weight) or local conditions (wind influence) make this necessary. The solution from GEZE

Standard version/package Floor spring TS 550 E complete with flat-tapered spindle, cement box and plug in extension lead (cover plate not included) The floor spring TS 550 E covers several door closer sizes in one housing. These sizes can be adjusted using an adjustment screw.

Closing force size size size size 3 4 5 6

Door leaf width (mm) up to 950 over 0950 up to 1100 over 1100 up to 1250 over 1250 up to 1400

Ordering information
Designation GEZE TS 550 E (operating voltage 24 V DC) Rebate type DIN left DIN right ID No. 064975 064976

Accessories (door Shoes and upper pivots, see page 24-27) Designation Cover Plates for GEZE TS 550 E Finish stainless steel LM dark bronze satin brass ID No. 057766 057769 057767 063558
1) 2)

Protective conduit Toothed spindle extensions length: 5 8 10 13 15 20 25 28 30 35 40 45 50 mm mm mm mm mm mm mm mm mm mm mm mm mm

010337 050930 010338 052170 010347 010372 010373 050931 010374 010377 010378 010381 010385

1) 2)

Only for approved fire and smoke protection doors where the use of spindle extensions has been specified in the official approval certificate The use of an extended spindle may become necessary depending on the mounting position. The original GEZE 550 E spindle can be unscrewed and replaced with a longer version effortlessly.

15

GEZE