Page 2 of catalogue Flat plate collector of Consolar Solare Energiesysteme GmbH

www.consolar.com
Solar Glass Copper Absorber TINOX/SUNSELECT Collector Trough Absorber Tube Strong Insulation

High energy savings and stable performance data I Collectors are usually exposed to extreme weather conditions and temperature changes. The aluminium collector trough of PLANO 26 guarantees stable performance in comparison with riveted or glued frame collectors even after many years of use. Consequently high annual energy savings are guaranteed in the long term. I The extraordinarily high thermal insulation of 60 mm reduces heat loss at the back of the collector. Because of this PLANO 26 performs well particularly on overcast spring, autumn and winter days. Special collector tubing for a long lifespan I The interior tubing of PLANO 26 corresponds to the latest findings of collector research. The solar fluid is pushed quickly and completely out of the collector through the special harp tubing should the collector become very hot in summer. Therefore the need to check the anti-freeze agent and, if necessary, exchange it arises much less frequently than with the standard tubing of other collectors. Consequently the solar installation has a longer lifespan. Attractive and pleasing design I The collector pan not only makes for an attractive design, it also protects against extreme weather conditions. Because of its slimline edges, the collector looks elegant on the roof and can be tastefully integrated into different types of houses. Easy installation and flexibility I Large collector fields can be assembled with PLANO 26. There are also different models for both the standing and the lying installation, PLANO 26 and PLANO 26 SP respectively. I The installation of the collectors allows for flexible choice: they can be fitted as an on-roof (parallel to the roof/20°/45°), flat roof or even as an in-roof installation. Excellent quality and selected materials I The high-grade materials are chosen according to proven reliability and are manufactured in a constant series quality. I Because of its often reduced endurance an anti-reflective coating has been intentionally omitted. I The quality coating TINOX/SUNSELECT used in PLANO 26 is applied in an environmentally-friendly process. Because of its good efficiency it leads to especially high heat gains.

Technical data Collector:

PLANO 26 / PLANO 26 SP
Standing / Lying
I

Dimensions: (L x B x T) in mm 2179 x 1169 x 107 Weight: 42 kg Gross Area: 2.55 m2 Aperture Area: 2.33 m2 Absorber Area: 2.26 m2 Referred to aperture surface: ETA 0:78.3% / 77.9% a1: 3,018 W/(m2K) / 3,383 W/(m2K) a2: 0,013 W/(m2K2) / 0,011 W/(m2K2) radiation angle correction factor K (50°): 0.95 / 0.89 Shutdown temperature: ca. 217°C / 180°C Tinox/Sunselect full-surface copper absorber 3.2 mm Solar safety glass AFT Solatex structured Harp arrangement / Serpentine tubing Closed aluminium trough Seal: cirumferential EPDM seal Frame: aluminium Emission-free rockwool: 60 mm PLANO 26: Standing PLANO 26 SP: Lying tested according to EN 12975-2 by ITW Stuttgart, test report no. 03COL335 Blue Angel eco-friendly award: RAL-UZ-73

I I I I

Yield:
Measured according to EN 12975-2 by ITW Stuttgart, test report No. 03COL335

I I I I I

I

Absorber: Glazing: Hydraulic system: Casing:

I I

I I I I

Insulation: Type of mounting: Quality testing (PLANO 26)

I I I I

I

Keymark certified. Reg. no. 011-7S033 F 10 Years

Consolar-warranty:

I

Consolar GmbH Sales headquarters Strubbergstrafle 70 60489 Frankfurt/Main Fax 069/740 93 28-50

Consolar GmbH Regional sales Gewerbestrafle 7 79539 Lörrach Fax 07621/422 28-31

info@consolar.de, www.consolar.com