Page 2 of catalogue Fire hose of Gollmer & Hummel GmbH

HERKULES
Coated single jacket fire hose
Bore size (mm) (inch) Weight (gr/m) (lbs/ft) 0.09 0.14 0.15 0.17 0.18 1.26 1.28 1.30 0.17 0.17 0.17 0.21 0.22 0.28 0.33 0.44 0.54 0.61 0.74 Working pressure* (Bar) (PSI) 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 12 12 10 10 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 175 175 150 150 Proof pressure (Bar) (PSI) 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 24 24 20 20 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 350 350 300 300 Bursting pressure (Bar) (PSI) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 36 36 30 30 750 750 750 750 750 750 750 750 750 750 750 750 750 750 750 525 525 450 450 Article code HERKULES 2F 25 1 " 135 38 1 1/2" 215 42 1 2/3" 230 45 1 3/4" 250 52 2 " 275 64 2 1/2" 380 70 2 3/4" 410 75 3 " 445 HERKULES 3F 38 1 1/2" 250 40 1 3/5" 255 42 12/3 " 260 52 2 " 315 55 2 1/6" 325 64 2 1/2" 410 75 3 " 490 102 4 " 660 800 110 4 1/3" 127 5 " 910 152 6 " 1,100
Standard length

11000-025000 11000-038000 11000-042000 11000-045000 11000-052000 11000-064000 11000-070000 11000-075000 11500-038000 11500-040000 11500-042000 11500-052000 11500-055000 11500-064000 11500-075000 11500-102000 11500-110000 11500-127000 11500-152000

: 15, 20, 30 m (50, 66, 100 ft), other lengths on request Standard colour : red Service temperature: -30°C up to +100 °C (-22°F up to 212°F), based on water Valid standards : DIN 14811, BS 6391 Type 2 and other national standards

Tolerances can be found in the technical appendix Change in technical specification without prior notice 10 Bar = 1 MPa
* It is important to note, that the technical data for pressure are only valid for hose and not for hose assembly with Couplings!

CONSTRUCTION
Jacket:
• high tenacity multifilament polyester yarn, circular woven in twill weave • 2F: 2-ply warp threads • 3F: 3-ply warp threads, heavy duty construction for better abrasion resistance

External coating:
• abrasive resistant synthetic coating to withstand the impact of oil, chemicals and heat • additional protection against mechanical damage at the jacket

SPECIAL OPTIONS
• Single lengths longer than 30 m (100 ft) 25 – 75 mm up to 1,000 m (3,300 ft) 90 – 110 mm up to 500 m (1,650 ft) • other dimensions • colour of coating according to customer specification Note that special options are subject to a higher price and a minimum order of 1,000 m (3,300 ft) per dimension. Production short lengths and overor shortproduction up to 10 % of the total order quantity have to be accepted. Please enquire for details!

Lining:
• high grade EPDM rubber, cold flexible, suitable also for hot water • excellent resistance to sea water, a wide range of chemicals, UV and ozone • coextruded CR rubber Adhesive layer, penetrates during vulcanisation completely into the weaving structure • this style of rubber lining guarantees a smooth inner tube with low friction loss and an excellent adhesion between lining and jacket

GOLLMER & HUMMEL GMBH Gässlesweg 34 D-75334 Straubenhardt (Industriegebiet Feldrennach)

Telefon +49 ( 0 ) 7082 / 9434-0 Telefax +49 ( 0 ) 7082 / 9434-99 info@gollmer-hummel.de www.gollmer-hummel.de