Page 17 of catalogue Fein grinders of C & E Fein GmbH

WSG 14-70 E – SETS AND ACCESSORIES

Stainless steel sets

7

Stainless steel set – Sanding Pipes / profiles

Sand fine welded seams without damaging adjacent surfaces. With subsequent surface finish. IAlso included: 10x medium serrated sanding discs (6 37 30 018 01 0) 1 flap wheel, grain 120 (6 37 21 052 01 0) 1 finishing disc (6 37 32 005 01 0) Set requires Angle Grinder FEIN WSG 14-70 E Order number 6 37 21 052 02 0

4 Stainless steel set – Preparing to polish surfaces / pipes / profiles Quickly and effectively removes scratches; optimum preparation for Polishing with matched sanding pattern; when preparing for polishing, effective material removal in little time. Also included: 1 cooling backing pad assy. (6 38 06 193 01 0) 50 sanding discs, grain 80 (6 37 28 096 01 9) 5 Pyramix sanding discs, grain 280 (6 37 17 223 01 0) 5 Pyramix sanding discs, grain 400 (6 37 17 224 01 0) 5 Pyramix sanding discs, grain 600 (6 37 17 225 01 0) 5 Pyramix sanding discs, grain 1200 (6 37 17 226 01 0) Set requires Angle grinder FEIN WSG 14-70 E Order number 6 38 06 193 02 0

Other accessories
Tool case Plastic, 450 x 310 x 135 mm Order number 3 39 01 118 01 0 Elastic backing pad with M14 flange, for fibre sanding discs Ø 125mm Inner flange Universal dust extraction device Ø 125 mm, for serrated sanding discs, elastic backing pads, support Plates and tapered twist brushes

Plastic box Case insert with lockable lid for small parts and accessories, suitable for tool case 3 39 01 181 01 0, max. 5 per case Order number Order number 3 39 01 119 00 0 Support plate with hook and loop section, for use with sanding discs with hook and loop fastening, M14 6 38 06 087 01 3

Order number

6 38 01 120 00 6

Threaded flange M14 for roughing discs, Cutting wheels, serrated sanding discs and round twist brushes Order number 6 38 02 052 00 0

Order number

9 26 02 067 01 6

Strip brush for universal dust extraction device

Anti-vibration handle M8, vibration-absorbing, to reduce vibrations during longer jobs

Threaded flange M14 for elastic backing pads and tapered twist brushes Order number Order number 3 21 19 119 01 7 Order number 6 38 06 168 01 2 Support plate with hook and loop section, for use with sanding fleece, M14 Order number 6 38 01 154 00 7 Fleece sanding discs Ø 115 mm, stable, with hook and loop fastening, for use with support plate 6 38 06 172 01 0 3 32 18 101 01 4

INOX round twist brush Ø 115 mm, M14

Order number

6 37 22 049 01 8

Order number

6 38 06 172 01 0

Grain coarse medium fine

No. in pack Order number 10 6 37 32 001 01 8 10 6 37 32 002 01 1 10 6 37 32 003 01 5 17