Page 2 of catalogue Duplicating milling machines of Elumatec GmbH

[
Three spindle copy router KF 178 > A specially designed copy router for efficient production of doors > For routing lock cylinders and round rosettes (safety cylinder locks) in wide profile sections and multichamber profiles of a very large profile construction depth > 3 independent working routing units > Separate operation of the horizontal and vertical cutter heads > Clamping the work piece upwards to support face of lock, therefore no need for new adjustment of the machine when using profiles of different heights > Simple tool changing due to „spindle lock“ > Flexible stop system with support rollers and adjustable hinged stops [ Technical information ] Routing unit on top > Routing capacity with length stop and copying template 340 x 100 mm > Stroke 110 mm Routing unit at bottom > Routing capacity with copying template 240 x 90 mm > Stroke from the front 95 mm > Stroke from the rear 45 mm > Spindle speed 12.000 r.p.m. > Clamping capacity for sections 115 x 100 mm > Power supply 230 / 400 V, 3~, 50 Hz > Power output each motor 0,74 kW > Compressed air supply 7 bar > Air consumption per working cycle 12 l without mist spray, 24 l with mist spray > Length 980 mm, width 1.250 mm, height 1.610 mm, weight 310 kg [ Optional ] > Copying templates > Blank copying templates > Collets > Stands and guide rods > Stop systems > Material clampings > Cutters > High performance cutting fluid

In one work fixture up to

Three spindle copy router KF 178/03 > See KF 178 however: > Infinite speed adjustment switch from 3.000 r.p.m. to 12.000 r.p.m. for routing thin walled steel and special steel profiles