Page 9 of catalogue Double mitre saws of Elumatec GmbH

Aluminium porfilbearbeitung

variants and large profiles
[
Double mitre saw DG 244 The reliable elumatec principle „Cutting from underneath“: > Therefore free access to support table > Big saw blade diameter and optimum use of the saw blade offers sufficient cutting capacity for all cutting variants > Standard for elumatec: Cutting to point to point dimensions at all angle positions and of all variants. Therefore no length calculation is necessary when cutting profiles of different heights > The universal pivoting and tilting of both saw heads allows cutting of high and wide profiles. Many of them can be cut without support blocks. Possibility of cutting compound mitres > Cutting of point to point dimension of all variants Therefore no complicated length calculation is necessary. This is a big advantage when cutting special angles > Safety hoods > Standard equipped with Saw blades > Pulsed coolant system [ Technical information ] > Minimum cutting length 90° 345 mm > Minimum cutting length 45° tilted 345 mm > Pivoting range inwards pneumatically 90°- 45° (manually up to 22,5° inwards and up to 140° outwards with digital display) > Tilting range inwards pneumatically 90°- 45° (angles between 90° and 45° manually adjustable with digital display and turret stop) > Cutting capacity see cutting diagram > Saw blade diameter 550 mm > Spindle speed 2.250 r.p.m. > Power supply 230 / 400 V, 3~, 50 Hz > Power output each motor 4 kW > Compressed air supply 7 bar > Air consumption per working cycle 40 l without mist spray, 64 l with mist spray [ Cutting length variants ] > 4.500 mm > 6.000 mm

]
o u b l e m i t r e s a w s ]
[ Optional ] > DG 244 M machine base made of steel sheet > Hydro-Pneumatic saw feed >Profile lifting bars > Additional Software for E 555: Optimizing program, software module for cut - off and oversize length cuts > Mobile or automatically hinged workpiece supports > Material clampings > Transom and first cut > Label printer for E 355 and E 555 > Disk drive for E 355 > Extraction systems >Automatic cut-offs > Roller conveyor > Saw blades > High performance cutting fluid [ Electronic variants ] Positioning control > See DG 79 page 18 PC control E 555/1 > See DG 142 page 20 PC control E 555/3 > See E 555/1 however: > 3-axis control for the cutting length and pivoting angles positioning > Pivoting range automatic inwards and outwards 22,5°- 90° - 140° PC control E 555/5 > See E 555/1 however: > 5-axis control for the cutting length, pivoting and tilting angles positioning > Pivoting range automatic inwards and outwards 22,5° - 90° - 140° > Tilting range automatic inwards 90° - 45° E 355

D

[ 08 | 09 ]

[ DG 244 + E 555/ 5 + special accessories ]