Page 2 of catalogue Double mitre saws of Elumatec GmbH

[
Double mitre saw DG 79 > The solid cast construction with integrated round table guarantees optimum profile support for cutting to length with angular accuracy > Continuous adjustment of pivoting range 0° to 45° left and right, providing the facility for working off the external and internal dimension > Vertical and horizontal Pneumatic material clampings to ensure optimum profile fixing > Standard equipped with Saw blades > Standard equipped with digital display E 111 > Pulsed coolant system > Stationary workpiece support [ Technical information ] > Positive location points at 15°, 30° and 45° > Pivoting range from 0° to 45° infinitely adjustable > Hydro-pneumatic saw feed > Cutting capacity see cutting diagram > Saw blade diameter 380 mm > Spindle speed 2.800 r.p.m. > Power supply 230 / 400 V, 3~, 50 Hz > Power output each motor 3 kW > Compressed air supply 7 bar [ Cutting length variants ] > 3.000 mm > 4.500 mm > 6.000 mm [ Optional ] > DG 79 M machine base made of steel sheet (Cutting length 3.000 mm, 4.500 mm) > Mobile workpiece supports > Transom stop > Extraction system > Material clampings > Roller Conveyors > Saw blades > High performance cutting fluid [ Electronic variants ] Manual cutting length adjustment with digital display E 111 > Accurate length setting by digital display > Switchover from absolute size to chain size > Storage of actual value for display when mains is switched off > Rapid read - out by digital display - resolution 0,1 mm > Switch to convert mm / inch > Input of any desired reference value by means of keypad

The simple way to

Positioning control E 355 > Measurement system independent from drive > Positioning accuracy +/- 0,1 mm per meter > Pneumatically locked on position > 5" matrix display with foil keyboard and hand wheel for navigation through the operation menus > With 999 memory positions. Correction values assigned to profiles > The position number, length dimension, profile number, angular position and quantity can be set in the position memory. > Switch to second language > Switch to convert mm/inch > Interface RS 232 [ Optional ] > Disk drive > Label printer

[ DG 79 + E 111 ]

pivoted