Page 7 of catalogue CNC-Lathe MAXXTURN 65 of Emco Maier GmbH

Many options

EMCO tool break monitoring The tool status is monitored by evaluating the load on the various axis drive Motors. Excessive loads point to wear or broken Tools. Too little load means a tool is missing.
A permanent eye on tool statuses

Part pick-up device Finished parts are transported from the counter spindle to the finished parts holder with the part pick-up device. This proven EMCO concept with the pivoting pick-up tray ensures optimum accessibility to the work area, free chip flow and the gentle removal of the finished parts.

Bull´s eye The rotating window gives you the best possible view of the machine's working area, so you can observe the cutting process even when coolants are being used.
An ingenious principle. The rotating window ensures that water is removed immediately.

7

Tool measurement tracer The measurement tracer mounted in the work area of the MAXXTURN makes it possible to measure the tools in the turret while in the machine. It can be swung in and out automatically using a button or an M function.

7

Unloading through the counter spindle Long, slender workpieces can be removed from the machine through the counter spindle. Finished pieces can be rolled simply onto an inclined surface or stored in a lateral magazine using a discontinuous belt.

Finished part conveyor The finished-part pick-up device puts the parts on an accumulating conveyor. A discontinuous belt ensures that the often very complex parts do not fall onto each other.

7

7 7 7

3

Short and to the point Floorspace costs money. Making small machine footprints a necessity. In answer to this demand, EMCO has developed the market’s most compact short loader: the EMCO LM1200.

Band filter with high-pressure Coolant pumps A coolant pressure of 25/40/60 or 80 bar can be set as needed. This enables coolant fed Drilling and Milling tools to be used to their best advantage.

7

67