Page 6 of catalogue CNC-Lathe MAXXTURN 65 of Emco Maier GmbH

The Machines

The technology

Automation/Options

Individual Automation

Technical Data Feed rate Horizontal Vertical Part dimensions 2 x 3 jaw gripper Maximum diameter Maximum length Maximum weight Part dimensions 4 x 3 jaw gripper Maximum diameter Maximum length Maximum weight Part dimensions 2 x 2 jaw shaft gripper Maximum diameter Maximum length Maximum weight

Gantry loader 120 m/min (4724.4 ipm) 60 m/min (2362.2 ipm)

220 mm (8.7“) 100 mm (3.9“) 10 kg (22.05 lb)

Tailor-made solutions. What would a highly flexible turning centre like the MAXXTURN 65 be without the possibilities offered by modern automation technology? Unmanned or minimally staffed manufacture is the task – and we have numerous tailored ways of providing it. For pre-shaped raw parts and parts with larger diameters than the spindle clearance, we offer a high-performance loading system for fully automatic loading and unloading. This has been conceived as one unit with the machine and impresses with uninterrupted operation and very short loading times. It is activated using the control unit. For producing serial workpieces from bar stock, there is a short-bar loader and a 3-metre bar loader.

120 mm (4.7“) 100 mm (3.9“) 5 kg (11 lb)

100 mm (3.9“) 300 mm (11.8“) 10 kg (22.05 lb)

3

Customizing options The MAXXTURN Gantry loader is a universal loading and unloading device for preformed raw parts of all kinds. EMCO Automation can equip it according to your individual needs with numerous gripper and Handling systems. How we do it: we standardize the componentsand customize the solution. The goal: a custom tailored machine for the same price as a standard unit.

2 x 3-jaw double-gripper head

4 x 3 jaw gripper head

Shaft gripper head

Workpiece magazine Pallet attachments for all raw parts enable the positioned loading of parts into the machine and raise the number of loadable parts for unmanned production. Changeover times are reduced or eliminated thanks to the perfect adjustment to the customer's parts.

7

12-position pallet fixture for oriented pick-up of die-cast connector parts

9-position pallet fixture for oriented pick-up of die-cast threaded connections

20 Pallets on the magazine table including part specific fixtures to store 4 bonnets on each