Page 7 of catalogue Access control systems of Geze GmbH

geZe seculogic access Control systems

geZe single Door unit gcDu 100

geZe single Door unit gcDu 100
For geZe basic-line
geZe single Door unit gcDu 100 the single Door unit gcDu 100 controls the opening procedure of a door. together with the geZe Finger Print or rFiD reader the single Door unit gcDu 100 constitute a small, but nevertheless comprehensive stand-alone solution. special functions at the door, such as an electrical (escape) door opener or a door locking system, can be integrated without any problem. the single Door unit gcDu 100 is connected to a reader (such as gcFP 401) by means of a two-wire line (rs485). it is located in the secured interior area. in the case of a release the reader sends an encrypted signal to the single Door unit (gcDu 100) that then switches its relay to release the door.
Fig. 7-1

Product features C encrypted data transfer C up to 20 users

Area of application C Access evaluating unit for 1 door C without computer connection or network (stand-alone)

housing
C metal panel with plastic cover (standard) C openings for cable feedthrough on side and

in bottom plate

Fig. 7-2

technical data technical product data Dimensions (w x h x D) weight Voltage range Power consumption Power consumption relay contact max. output current 12 V reader temperature range Protection type interface Field of use order information Designation geZe single Door unit gcDu 100 Finish incl. housing iD no. 130663 120 x 120 x 40 mm Approx. 100 g 10 - 28 V Dc 30 mA at 15 V Dc (without connected reader) 0.5 w (depending on the current consumption of the readers) 48 V / 2 A 1A 0 - 40 °c iP 20 rs485 interiors up to 85% humidity (non condensing)

7